Yamaha DBR12 Powered Speaker

129.98
500.40
        SPECIAL OFFER

          Please select all product options

          Product was out of stock

          share
          Description

          Description

          Yamaha's DBR12 powered speaker ushers in a new era of high-performance, grab-and-go PA. Packing a potent 1,000W amplifier and custom-designed 12" woofer, the DBR12 cranks out a whopping 131dB of full-range sound. Despite its formidable output, this revolutionary speaker tips the scales at under 35 pounds, courtesy of a lightweight yet durable enclosure equipped with ergonomic handles. The DBR12 is Yamaha's most portable powered speaker that harnesses the same cutting-edge DSP and amplification technology as their professional DSR and DXR series.

          High-Efficiency 1,000W Amplifier

          At the heart of the DBR12 is a lightweight, Class-D amplifier that churns out 1,000W of power with remarkable clarity and precision. This high-efficiency design, combined with Yamaha's optimized DSP algorithms, enables the DBR12 to achieve arena-worthy volume levels without sacrificing accuracy or overtaxing its components.

          Custom-Designed 12" Woofer and 1.4" Tweeter

          Yamaha developed the DBR12's woofer and tweeter in-house to deliver the purest, most natural sound possible at any volume. The rigid, high-power woofer pumps out tight, defined bass with minimal distortion. Paired to a 1.4" compression driver and precision waveguide, the tweeter reproduces midrange and high frequencies with stunning resolution.

          Onboard 2-Channel Mixer

          Despite its compact size, the DBR12 incorporates a built-in 2-channel mixer for blending multiple inputs. Channel one features both XLR and 1/4" inputs for microphones and line-level devices. Channel two provides 1/4", RCA and 3.5mm inputs, allowing you to connect everything from keyboards and electronic drums to MP3 players and laptops. Select either the CH1+2 mixed output or CH1 thru output depending on your needs.

          Lightweight, Durable Enclosure

          Yamaha designed the DBR12's plastic enclosure to be as lightweight, portable and road-ready as the components inside. The wedge-shaped cabinet can be set up and torn down in minutes. M8 rigging points allow for permanent installation, while the 50-degree angle provides ideal floor monitor positioning. A rugged steel grille protects the woofer and tweeter and ergonomic handles make transporting the DBR12 a breeze.

          Features

          Speaker configuration
          • Active/passive:Active
          • Type:Two-way full range
          • LF driver:12"
          • MF driver:N/A
          • HF driver:1.4" ferrite driver
          Power
          • Amplifier class:D
          • Wattage:465W RMS, 1000W peak
          • Mixer/preamp:2 Channel
          Audio
          • Frequency response:52Hz - 18kHz
          • Coverage pattern:90 x 60
          • Max SPL:131 dB
          Inputs
          • XLR:2 XLR/TRS
          • TRS:
          • TS:
          • RCA:
          Output/thru
          • XLR: 1 mix output
          • TRS:
          • TS:
          • RCA:
          • SPEAKON:
          Enclosure
          • Cabinet material:Polypropelene
          • Width:14.7"
          • Height:23.7"
          • Depth:13.7"
          • Weight:34.8 lb.

          Specs

          • Type: 2-way, Bi-amp powered speaker, Bass-reflex type:
          • Frequency range (-10dB): 52Hz - 20kHz
          • Nominal coverage, H: 90, V: 60
          • Components: Diameter:12" cone, Voice Coil:2", Magnet:Ferrite
          • HF: Diaphragm:1.4", Type: 1" throat compression driver, Magnet:Ferrite
          • Crossover: 2.1kHz: FIR-X tuning (linear phase FIR filter)
          • Output power: Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)
          • Maximum output level (1m; on axis): 131dB SPL
          • I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
          • Processors: D-CONTOUR: FOH/MAIN, MONITOR, OFF
          • Heat dissipation: Fan cooling, 4 speeds
          • Power requirements: 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
          • Power consumption: 74W(1/8 Power Consumption), 18W(Idle)
          • Cabinet material: Plastic
          • Finish: Black
          • Handle: Side x 2
          • Flying and mounting hardware: Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
          • Pole socket: 35mm (Bottom x 1)
          • Dimensions: 376mm (14.8")
          • H: 601mm (23.7")
          • D: 348mm (13.7")
          • Net weight: 15.8 kg (34.8 lbs)
          • Accessories: BBS251, BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket)